Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Valves/Timing
You're viewing 26 - 50 of 80 products in this category
Pushrod Set (16) Genuine Land Rover, TVR, Morgan
Set of Standard Pushrods - OE Land Rover Genuine.

Also suitable for TVR 350,390 4.0, 4.6,5.0
Morgan + 8 3.5,3.9,4.6


Always check your pushrods for straightness and wear on the tips when installing new cam/lifters & rocker gear.
more >>
Edelbrock Elite Chevy V8 Rocker Covers for Rover Engines
These superb quality Edelbrock Polished Alloy Rocker Covers give that engine the "custom" look.

Price is per Pair

Requires Gaskets & Breathers

Rocker Cover Adapter Plates also available to suit Rover V8 Engines.
more >>
Rover V8 Timing Cover Assembly Conversion
These new covers are a replacement for those hard to find or badly worn SD1 timing covers.

They are supplied complete with neoprene front oil seal, and cover to block gasket as well as uprated oil pump gears to provide increased volume and pressure..

The larger diameter and deeper oil pump g......
more >>
Adjustable Pushrods 5/16 tube (hydraulic)
Adjustable pushrods to accurately set follower preloads. These pushrods are suitable for use with Hi-Rev or Rhoads type lifters -please enquire
more >>
Rocker Shaft Assembly (STD) Pair
New Genuine Rocker Assembly complete with
New Shafts, Rocker Arms, Rocker Pedestals
Springs, thrust washers etc - fully assembled
more >>
Rocker Arms (Steel) Budget Low Price Item
Budget HD Steel rocker Arm Sets - use standard shafts and pedestals.

Made in China -

Strong rocker arms but heavier than standard aluminium type. Unlikely to fail in service as rocker pad is an integral part of the casting unlike the OEM original items. These incidently are 640 + VAT Per se......
more >>
Rocker Shaft Bolts (Genuine)
To suit 3.5,3.9,4.2,4.0 & 4.6 Litre Engines

Genuine Land Rover Bolt Set. Not aftermarket
more >>
Crane HD Valve Double Valve Springs + Retainers
For use with Camshafts upto and including
AS 224 & AS 234 HYD
AS 238 & AS 428 MECH
more >>
Edelbrock Signature Chevy V8 Rocker Covers
Pair of Highly Polished Chrome Rocker Covers to suit SBC Engines

Requires gaskets and breathers
more >>
Edelbrock Elite/Signature Breathers
To suit the superb range of Elite and Signature Chevrolet Small Block Rocker Covers
more >>
Rover V8 (all) 3.5 - 5.0 "The Performance Alternative to STD Rocker Arms. Yella Terra Roller Rocker Arms YT6000R Series ( on offer until current stocks last)
Set of 16 Roller Rocker Arms - bronze bushed to suit standard diameter rocker shafts. Made from aluminium for low inertia.

Rockers arms feature adjusters so no need to use adjustable pushrods (289.95 per Set). Supplied with spacer shims for precise loation on the shafts
(fitting instructions i......
more >>
Chrome Long Rocker "T" Bolts
Full set complete with studs to allow the easier removal of Rocker Covers.

Popular for custom car applications.
more >>
Stage2/3 Performance Valve,Guide and seal Kit
8 off 1.63" Inlet Valves - Tuftrided Stainless Steel (21-4N) +Waisted stem

8 off 1.4" Exhaust Valves - Tuftrided S/S (21-4N) with waisted stems

8 Bulleted shortened In Valve Guides

8 Bulleted Shortened Ex Valve Guides

16 Neoprene Valve stem seals
more >>
Adjustable Pushrods (Mechanical Cams)
Adjustable Pushrods to suit Mechanical Camshafts such as the M series 238.248 etc
Supplied with tips to allow setting the correct pushrod length and geometery
more >>
Ford COBRA Rocker Covers
Pair of Cobra Cast Aluminium Rocker covers with highlighted fins - complete with chrome Filler
more >>
Valve Spring Shims
Valve Spring Shims to enable setting valve springs to the correct installed height.
To suit springs 1.25" OD 0.625ID

Full set includes :

16 x 0.016"
16 x 0.032"
16 x 0.064"


Image is for display purposes only and item supplied may therefore differ
more >>
Rover V8 Hollow Chrome Moly Pushrods + Hi Rev SOLID Lifters
These pushrods allow converting to the superior Chevy oiling system. Oil flow is directed through the lifter top cap up through the pushrod and lubricates the rocker arm to pushrod contact.

This reduces friction which aids engine cooling but more importantly gives additional lubrication for high ......
more >>
Chevrolet Rocker Cover to Rover V8 Adaper Plates
These steel lazer cut adapter plates allow fitting of the Chevrolet Rocker covers which are favoured by custom car builders.

Each set is supplied with Rover Rocker Cover Gaskets and the screws required to mount the plates.

Since the Chevrolet R/C are a higher profile than the Rover items this......
more >>
Rover V8 3.5,3.9,4.2 Camshaft Timing Sprocket
Standard Nylon and alloy Camshaft Timing Sprocket.
Suitable for all Rover 3.5,3.9 7 4.23 Litre Engines.
more >>
Rover V8 Vernier Dual Roller Chain Timing "Kit"
Vernier Timing Set to allow 100% accurate cam timing.

Kit includes Adjustable Vernier Camshaft Sprocket
Crankshaft Sprocket
Duplex Reynolds Pre-stretched Roller Chain Set
Allen Key included complete with degree disc.

These chains have been used on flat plane v8s running to 8200rpm and have ......
more >>
Rover SD1 STD Valve, Guide and Seal Kit
8 off 1.568" Inlet Valves -

8 off 1.356" Exhaust Valves -

8 In Valve Guides machined to accept later type stem seals

8 Ex Valve Guides machined to accept later type stem seals

16 Neoprene Valve stem seals

Image is for display only.
more >>
Range Rover & Discovery 2 Timing Cover
Genuine Timing Cover
Removed from New engines and unused
To suit 4.0 & 4.6 Litre Range Rover p38a and Discovery 2 engines.
Retail Price from Land Rover over 600 !!
Complete with oil pump Gears
more >>
Rover Intermediate Timing Cover. For Distributor Driven engines
New Timing Cover for Intermediate engines approx 1993 - 1996.

These covers are used on engines where they utilise a one piece serpentine belt system to drive the engine ancilleries.

The covers are machined to accept a conventional distributor and have crankshaft driven oil pump gears which do......
more >>
Rover V8 Cloyes "Street" Duplex Roller Chain Set
Cloyes Duplex "Street" Roller Chain Set.

Features Steel Gears with 3 position keyway for timing in your cam 4deg advance, retard or standard.

Duplex pre-stretched roller chain.

The street sets are a alternative to the more expensive true roller sets but at a more attractive price.

Cost ......
more >>
P38/RV8 Valve Springs 4.0/4.6 + other V8 engines
Standard Valve Spring Set for 10 Bolt Cylinder Heads can also be used on earleir 14 bolt Heads.

Fitted Length 1.6"
Free Length 1.9"

Pressure Valve Open 165 Lbs
Pressure Valve Closed 76 Lbs

DEFENDER 3.5 V8 Petrol 1987 - 2000
DISCOVERY 1 V8 1989 - 1998
DISCOVERY 2 V8 1998 - 2004
R......
more >>
4.6 Litre Valves, Hi-Flow Guides and Seal Kit
Full set of STD Valves, Hi-Flow Guides Guides and Neoprene Valve Stem seals.

To suit 10 Bolt Cylinder Heads or for upgrading worn valves/guides in your
1976> Sd1,
Range Rover Classic 3.5,3.9,4.2,
Discovery 1 & 2
TVR 3.5,3.9,4.2,4.0 or 4.6 Engine.

Inlet Valves 40mm Head Dia. Waisted St......
more >>
4.0/4.6 10 Bolt Inlet Valves
Waisted Stem 40mm Inlet Valves.

Can be used to imrove flow on 1976 > 3.5,3.9 & 4.2 Cylinder Heads.
more >>
Rover 4.0/4.6 GEMS Cam Timing Sprocket
Cam Timing Sprocket for 4.0/4.6 Engines
1995 - 1998 Range Rover
more >>
Timing Sprocket 4.0/4.6 Litre Engines ( Bosch/Thor )
Timing Sprocket to suit :

Land Rover Discovery 2 4.0 Litre
Range Rover 4.0/4.6 1998/9 - 2002
more >>
Rover V8 Timing Chain ( USA Made)
Standard Timing Chain
Federal Mogul USA Brand or equivalent brand
(Not bitpart/Bearmach)

ROVER SDI
MORGAN +8
TVR 350 - 500 ALL
DEFENDER 3.5 V8 Petrol 1987 - 2000
DISCOVERY 1 V8 1989 - 1998
DISCOVERY 2 V8 1998 - 2004
RANGE ROVER 95-02 V8 1995 - 2002
RANGE ROVER CLASSIC V8 1987 - 1......
more >>
Rover V8 L/H & R/H Genuine Rocker Arm Set
Land Rover Genuine Parts

Left Hand Rocker Arm (8)
Right Hand Rocker Arm (8)
more >>
Rover V8 Rocker Shafts
New Genuine Land Rover Rocker Shafts.
more >>
Rover V8 Crankshaft Timing Sprocket
Crankshaft Timing Sprocket

ROVER SD1 3500
TVR 350,390,420, CMIMERA, GRIFFITH
MORGAN + 8
DEFENDER 3.5 V8 Petrol 1987 - 2000
DISCOVERY 1 V8 1989 - 1998
DISCOVERY 2 V8 1998 - 2004
RANGE ROVER 95-02 V8 1995 - 2002
RANGE ROVER CLASSIC V8 1987 - 1995
SERIES III 3.5 V8 Petrol 1979 - 1982
more >>
Land/Range Rover Motronic Cam Sprocket (Genuine LR)
Timing Sprocket 4.0/4.6 Litre Engines ( MEMS)

Timing Sprocket to suit :

Land Rover Discovery 2 4.0 Litre
Range Rover 4.0/4.6 1998/9 - 2002

Image is for display only - Item listed is Genuine Boxed Land Rover
more >>
Land Rover Defender 4.0 GEMS Timing Cover
New GEMS 4.0 Litre Defender Timing Covers - removed from un-run new Land Rover Engines.

These are similar to the GEMS and MEMS Timing Covers and use te serpentine belt system but differ in respect to the depth of the cover.

No longer available from Land Rover.
more >>
Stage 4 Big Valve, Bulleted Guide and Seal Set
Set of

1.692" SS Inlet Valves - STD stem and Groove
1.455 SS Ex. Valves - STD Stem and Groove

Set Bulleted and shortened Inlet Guides
Set Bulleted and shortened Ex. Guides
Set 16 Neoprene Valve Stem seals.

These valves are the largest sized valves that will fit a Rover V8 Cylinder head......
more >>
Competition Outrigger Supports
Anodized Alloy Outrigger Supports

Use these to prevent rocker shafts breaking.

The rocker arms on the extreme back and front of your Rover V8 engine are inadequately supported for sustained high rpm use.

Installing these supports will minimise deflection of the rocker arm and prevent the ......
more >>
***Ultimate Performance*** Yella Terra Race Full Cradle Roller Rocker Total System YT 6305
Stronger than the GpA Steel Assembly.
Less mass and wear on valve guides due to reduced axial thrust, means less friction, wear, and this equates to more power.

This "Total System" replaces all original Rover parts except pushrods, and rocker shaft bolts.

The Rocker Arms feature Torrington......
more >>
Typical Damage to Rover V8 TVR Rocker Arms. Solution fit Roller Rockers !
We get frequent enquires from customers who have modified and uprated engines fitted to their cars which have suffered from the inevitable valve train and specificaly rocker arm failure.

This problem seems to affect generaly TVR and other vehicles fitted with high lift camshafts.

Greater va......
more >>
Rocker Shaft Washers & Split Pins
Set of 4 solid washers fro rocker shaft ends and split pins.

Does not include wavy shim washers
(available seperately)
more >>
Range Rover Classic V8 Timing Covers (New) 1970 - 1976
New Genuine Land Rover Timing Cover - Now obsolete from Land Rover ( Last price 818.87 + VAT 163.77)

These covers are suitable for the 1970 - 1976 engines with female oil pump shaft.

Supplied with gaskets and oil pump gears and genuine spare front oil seal
more >>
Range Rover Classic 1976 - 1994 New Timing Cover and Uprated Oil Pump Gear Kit ( last new one available )
New Genuine Land Rover Timing Cover - Now obsolete from Land Rover ( Last price 818.87 + VAT 163.77)

Also Included is deeper oil pump gear kit, up from the std 26.5mm to 29mm deep gears for increased volume and pressure.

These covers are suitable for the 1976 - 1994 (non serp) engines with ......
more >>
MGR V8 New Timing Cover and Uprated Oil Pump Gear Kit + 10 - 15% Volume and Pressure.
New Genuine Land Rover as fitted to MG RV8 Timing Cover -Now obsolete ( Last price 818.87 + VAT 163.77). This was fof the cover only !!

Also Includes deeper oil pump gear kit, up from the std 26.5mm to 29mm depth for increased oil volume and pressure.

This helps to promote bearing life and ......
more >>
Rocker Cover Spacers (Steel 10mm thick)
Drilled for standard rocker covers

Raises R/C 10mm + additional gasket thickness to assist rocker to cover clearance when using roller rockers.
more >>
Stainless Steel Cap Head Screws + 10mm
Extra Long Rocker Cover Screws for use when installing our 10mm Rocker Cover Adapters
more >>
Rover, Morgan, TVR V8 Stainless Rocker Cover Screws
Stainless Steel Cap Head Rocker Cover Screw Set.

Will suit all Land Rover
Land Rover Defender, 90,110, Classic, P38
TVR 350,390,420, Chim & Griff
Morgan + 8
more >>
Replacement Rocker Shaft Pillars/Posts
Replacment Alloy CNC Machined Rover V8 (all engines) Rocker Arm Pillar/Post Set
more >>
MGCC BCV8 Championship Yella Terra YT6305 Total system
As the MGCC Race season approaches its midway we are pleased to confirm that consistantly 4 of the top 7 placed cars in Class D are using YT6305 Total System Roller Rocker Assemblies.

This data confirmed from Race Meetings at

Brands Hatch, May 15
Race 1 Position 1,3,4,5
Race 2 Position 1,......
more >>
MGB V8 Replacement Timing Cover
Replacement Timing Cover
more >>
Edelbrock Rocker Cover and Adapter Plate Kit ( Rover V8 Applications)
Rover V8 (all variants) Edelbrock Finned and Polished Rocker Covers (pair) complete with fittings.

Kit Inludes:
Chevy Style Edelbrock Rocker Covers (finned & polished)
Steel Adapter Plate Kit inc Screws
Chrome Signature Rocker Cover Breather/Oil Filler
Cork Rocker Cover Gaskets

Installati......
more >>
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |