Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Camshafts
You're viewing 1 - 25 of 36 products in this category
Std Camshaft Rover V8 3.9 litre Engine. (European Made)
Made in the European Union - OEM Supplier.

Worth approx 5-8 BHP over that acheived with 3.5 carb cam. For best results also consider Duplex roller chain set for reduced friction and increased BHP

Always replace hydraulic lifters when installing a new camshaft.

1000-5500 RPM
more >>
KC Performance M248 Competition Camshaft
Manufactured from Chilled Iron and custom ground using CNC machinery for 100% accuracy.

To suit Rover V8 3.5,3.9,4.0,4.6 & 5.0 Litre Engines.

Machined to accept Cam Retaining Plate

Long Nose Type for engines originally equipped with distributor.

Application - Competition
Power 3000......
more >>
Kent Cams M238 Competition Camshaft 3.5 - 5.0 Litre
Manufactured from Chilled Iron and custom ground using CNC machinery for 100% accuracy.

To suit Rover V8 3.5,3.9,4.0,4.6 & 5.0 Litre Engines.

Machined to accept Cam Retaining Plate

Long Nose Type for engines originally equipped with distributor.

Application - Competition
Power 2750......
more >>
KC Performance M256 Race/Rally Camshaft
Manufactured from Chilled Iron and custom ground using CNC machinery for 100% accuracy.

To suit 3.5,3.9,4.0,4.6 & 5.0 Litre Engines. Please state engine displacement and application when ordering.
0.514" & 0.534 Lift
Power 4000 - 8250rpm
304 & 310 degrees duration
Timing 48/76 87/43
104degr......
more >>
Camshaft Timing Degree Wheel
Morroso Timing Wheel - large diameter.
Steel with plastic coating for durability
As uswed by us for accurate degreeing of camshafts.
more >>
Comp Cams Instalation lube
Tub of CC engine assembly lube
more >>
Rover V8 STD 3.5 Camshaft Kit ( Rover Sd1, MGB V8, Range and Land Rover)
3.5 RV8 Camshaft
Set of STD Followers 16
STD Timing Chain Set
Cam Lube
Cam End Bolt

Due to the poor availability of the specific cams for the 3.5 carb, LC, HC and Efi engines, we now supply the 3.9 Efi cam as this fits stright in and gives a slight increase in performance without any other m......
more >>
4.0 Litre STD Camshaft (Discovery 2, Range Rover P38 0995 - 2002
New 4.0 Litre Camshaft Genuine Land Rover take out units removed from new engines.

To 4.0 litre engines.
Corresponds to Part No ERR3720

DISCOVERY 2 V8 1998-2004 4.0
RANGE ROVER 95-02 V8 1995-2002 4.0
more >>
Kent Performance High Torque P38 Range Rover & Discovery 2 Camshaft to suit 4.0/4.6 GEMS/MEMS Engines. UK Made
Camshaft suitable for the 4.0/4.6 litre engines and derivatives using the serpentine timing cover assembly with GEMS or MEMS Engine Management

High Torque Camshaft suitable for 4WD vehicles. Approx 16 - 18 BHP increase in power and similar increase in torque with these cams.

Manufactured from......
more >>
Camshaft End Bolt
End Bolt - Imperial Thread
To suit 3.5,3.9,4.2 standard camshafts as well as
Crower, Kent and Piper cams
more >>
Camshaft Fuel Pump Drive/Spacer
Fits between camshaft timing sprocket and distributor drive gear
more >>
Rover V8 3.9 EFi Cam, Lifters & Steel timing Set
Rover 3.9/4.2 Efi Camshaft
Steel Heavy Duty Timing Set
Set of OE Land Rover Followers/Lifters
Supplied with cam bolt & cam lube

This combination will yeild an additional 5-8BHP over the standard 3.5 carb camshaft due to the revisions.

For further improvements in power and reliability ie mo......
more >>
Range Rover Serpentine Type Road & Comp Camshafts
We are now stocking the full range of Hydraulic and Mechanical camshafts to suit the Serpentine type GEMS Engines.
These camshafts are available in a wide range to suit numerous applications and offera considerable saving over the only other camshafts currently availalble
more >>
Rover V8 Uprated Cam for Efi Engines ( 2WD)
New Uprated Efi cam can add as much as 26 BHP over standard camshaft in your Efi Flapper or Hotwire Engine.

Testing suggests an additional 3-4 degrees additional advance gives best results. Suitable for Auto/manual transmissions.

Note front NOT machined to accept later type thrust plate.

F......
more >>
Camshaft Teflon Thrust Bolt Kit
Camshaft Thrust Bolt Kit.

Kit contains Thrust bolt with Teflon Button (fitted)
Camshaft End Float Spacer

Used to prevent camshaft endfloat on all Rover V8 engines using distributor ignition (imperial thread rate only)

Will also fit Crower, Crane, Hurricane,Typhoon, and some other aftermar......
more >>
KC Performance H214 Camshaft Sports TVR 3.9, 4.5 Litre Engines.
Manufactured from Chilled Iron and custom ground using CNC machinery for 100% accuracy.

High Lift Hydraulic Camshaft.
Best performance cam for road/track day applications and suitable for 3.9 and larger capacity Rover engine using Flapper or Hotwire Injection. Okay on carbs too, 4 barrel eg.
......
more >>
KC Performance High Torque Cam Kit + 22 BHP Over Standard ( 3.5,3.9,4.2 Carb/Efi or GEMS, Motronic 4.0/4.6
Manufactured from Chilled Iron and custom ground using CNC machinery for 100% accuracy.

The Heart of engine performance and one of the easiest and most cost effective means to improve the BHP and Torque of your engine.

If the head surfaces have not been previously machined this cam should fi......
more >>
TVR Griffith and Chimaera Camshaft 4.5/5.0 litre (replacement for 885)
Chilled Iron Camshaft (Best Quality) to suit 4.3, 4.5 and 5.0 Litre Engines.

One of the best all round performing camshafts for these engines for road and track day use.

Straightforward replacement.

Similar to the TVR 435 cam but with less shunting at low rpm. For best results rechip or if......
more >>
Land Rover 4.6 Litre Standard Camshaft
Replacement Camshaft for the following models and corresponds to ERR5250

DISCOVERY 2 V8 2003-2004 4.6
RANGE ROVER 95-02 V8 1995-2002 4.6
more >>
New 4.0 Litre Camshaft ( Genuine Land Rover)
New OE Camshaft to suit 4.0 litre engines.
Land Rover Part No ERR3720

DISCOVERY 2 V8 1998-2004 4.0
RANGE ROVER 95-02 V8 1995-2002 4.0
more >>
P38 Engines 1995 2002 cam end bolt
Camshaft End Bolt to suit
Disco 2
Range Rover P38 1995 - 2002
Short Nose Camshafts
more >>
Camshaft Retaining Plate (1994 > Engines) TVR
Cam Retaining Plate to suit

Land Rover Discovery 1 1994 - 1998
TVR Chimarea Griffith 4.0 4.5 5.0 Litre

Genuine Land Rover Part
No Longer Available
more >>
Range Rover GEMS STD Cam Kit
Range Rover P38 GEMS Cam Kit.
Not Britpart/Bearmach

All parts Made in USA or European Union

Kit Contents Include :

1 x OE Camshaft for 4.0 or 4.6 Engine
16 x Made In Detroit USA Lifter Set
Set USA Timing Chain,
Cam Sprocket, Crank Gear
1 x Cam End Bolt
1 x Cam Lube
1 x Timing Cover ......
more >>
Range Rover P38 STD Cam Kit ( Motronic/Thor Engines 1999>)
Range Rover Motronic STD Cam Kit

Range Rover P38 Motronic Cam Kit.
Not Britpart/Bearmach

All parts Made in USA or European Union

Kit Contents Include :

1 x OE Camshaft for 4.0 or 4.6 Engine
16 x Made In Detroit USA Lifter Set
Set USA Timing Chain,
Cam Sprocket, Crank Gear
1 x Cam......
more >>
Range Rover P38 GEMS or Thor High Torque Cam Kit ( Special Offer)
Range Rover P38 GEMS Cam Kit.

All parts Made in USA,UK or European Union

Kit Contents Include :

1 x High Torque Camshaft for 4.0 or 4.6 Engine
16 x Made In Detroit USA Lifter Set
Set USA Timing Chain,
Cam Sprocket, Crank Gear
1 x Cam End Bolt
1 x Cam Lube
1 x Timing Cover Gasket
1 x......
more >>
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |