Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Camshafts

Pro Cam 230 Rover V8

Worth 22BHP over OE camshaft, ideal for most applications where smooth power delivery is required. Gives good tickover and also suits automatic tranmission instalations.

Perfect combination of power and milage with extended rpm range. Strong low end and mid-range for on or off road applications.

Good idle - 850rpm & power from 1500 - 4500rpm
Redline 4500rpm Plus

This cam should fit straight in without any further engine mods. This however assumes the decks and cylinder heads have not been extensively machined. If in doubt check clearances whilst assembling.

Use with uprated lifters for best performance and always check lifter preload setting 0.020 -0.60".

Cam Spec Sheet Available
Supplied with Cam spec sheet and cam lube

enlarge picture
£222.99
All prices include VAT @ 20%
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |