New Uprated Efi cam can add as much as 26 BHP over standard camshaft in your Efi Flapper or Hotwire Engine.
Testing suggests an additional 3-4 degrees additional advance gives best results. Suitable for Auto/manual transmissions.
Note front NOT machined to accept later type thrust plate.
Fits straight in without any additional machining if the cylinder head/block surfaces have not been machined and the valve guides are fitted to the correct height.
For best results use with Cloyes timing set and STD, Crane or Rhoads Lifters.
Valve springs shopuld be uprated to HD singles and rocker pedestal shiming may be required.
Power Idle - 5500rpm
@ 0.50" In 206
@ 0.50" Ex 206
Lift with std Rockers (1.6:1) In/Ex 0.433"
Lobe seperation 108 Degrees.