Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Gearboxes

Tremec T5 TVR Tail housing extension kit. Cobra replicas etc

Tailhousing extension kit for moving the gearlever further back when using a TVR Chim/Griff/Tuscan Gearbox.

The orginal shifter position of the TVR box is approx 30 cm from the front face of the gearbox to the shifter centre line.

This means the lever exits somwhere under the dash or in a position which negates a double jointed disposition in order to shift gears !

The solution which allows relocating your shifter 50 cm from the front face of the box back to a sensible location.

Used, cleaned and inspected
Long Tail Housing casting
Shifter Rod/rail
New Tail Housing Bushing
New Tail Housing Seal
Used Shifter block
Used Shifter ( will require gear lever)

Tremec Parts manual in pdf format gives detailed info on parts and how to dismantle/assemble.

Note: the tailhousing has the facility for a speedo drive. The gearbox you are using however may not have the drive gear for the speedo, in which case a core plug will need to be fitted to seal up the gearbox.

We also stock Slip yokes for the above gearbox if you need to fabricate a conversion propshaft

£259.99
All prices include VAT @ 20%
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |