Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Camshafts

Pro Grind 232 (28 - 30 + BHP)

Worth 28 -30 BHP over OE 3.5 camshaft, ideal for most applications not suitable for automatic tranmission or 4 x 4 instalations.

The 232 grind offers strong midrange with the emphasis on top end power & torque

Loopy idle - 1100rpm power from 2000 - 6000rpm
Redline 6500rpm +

Always check clearances whilst assembling.

Machine valve guide tops to give sufficient retainer to guide clearance or fit our shortened bullet guide sets.

Recommended components

Use with uprated lifters for best performance and always check lifter preload setting 0.020 -0.60".
Minimum 9.35:1 CR
Okay with STD but better with Stage 1 or 2 Ported Heads
Uprated Single or HD Double Valve Springs

Suitable induction/ignition will yeild in excess of 230 BHP on a 3.5 litre engine.

Suitable for lightweight vehicles and 2 WD applications.

Fast road, circuit and trackdays
A Real Performer !
One of our favorites and best sellers.

enlarge picture
£229.99
All prices include VAT @ 20%
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |