Air Cleaners
AVO Dampers
Bafled Sumps
Bearings
Bellhousings
Block Bolts
Brackets/Mountings
Cam Followers
Camshafts
Carbs and Injection
Cobra Seats
Con-Rods
Cooling accessories
Crankshafts
Cylinder Block
Cylinder Heads
Electrical
Engine Pulley's
Exhaust Manifolds
Flywheel/Clutch
Gaskets/Seals
Gearboxes
Inlet Manifolds
Long Engines
Miscellaneous
Oil/Lubrication
Pistons/Rings
Short Motors
Stroker Crank Kits
Suspension
Turnkey Engines
Valves/Timing
Water Pumps
Home > Pistons/Rings

Rover V8 96mm Forged Pistons - 4.8 Litre Conversion

V8 Rover Forged Pistons.

Use with flanged linered block bored to 96mm for 4.8 litre conversion using standard 4.6 rods and crankshaft.

Forged Pistons approx 9.5:1 CR
Std/Tool Steel Pins
96.00 Bore
Pin diameter Press Fit for STD 4.6 Conrods
Similar weight to standard pistons
Complete with piston rings
Piston mass with pins approx 580gm - similar to factory cast
Piston Bowl volume 22cc
Approx CR 9.75:1
-
Improves torque, BHP and adds some serious performance to your P38 or Disco 2.

This conversion with modified heads and our High Torque cam should yeild 270 + BHP or approx 50BHP over standard.

Same pistons and used with ITBs, dry sump, stage 4 heads and mechanical cam will yeild as much as 370 - 380 BHP @ 6800 rpm

Further power improvements are also available with ported and flowed intake, 45mm trumpet base and enlarged TB to 71mm.


(image is library image for display only)

enlarge picture
£996.00 (set of 8)
All prices include VAT @ 20%
© Abbey Sportcars Ltd.   |   Company No. 03916786   |   VAT No. 858100630   |